What are the transmission performance of CNC four roller bending machine
Release time:
2024-10-18
Author:
Source:
When the reducer is used in the transmission equipment of the numerical control four-roller plate bending machine, the power of the high-speed operation of the motor is reduced by meshing the large gear on the output shaft with a small number of teeth on the input shaft of the reducer. The reducer of the four-roller plate bending machine increases the output torque while reducing the speed. The torque output ratio is based on the motor output multiplied by the reduction ratio, but attention should be paid not to exceeding the rated torque of the reducer and reducing the inertia of the load, the reduction of inertia is the square of the reduction ratio.
When the reducer is used in the transmission equipment of the numerical control four-roller plate bending machine, the power of the high-speed operation of the motor is reduced by meshing the large gear on the output shaft with a small number of teeth on the input shaft of the reducer. The reducer of the four-roller plate bending machine increases the output torque while reducing the speed. The torque output ratio is based on the motor output multiplied by the reduction ratio, but attention should be paid not to exceeding the rated torque of the reducer and reducing the inertia of the load, the reduction of inertia is the square of the reduction ratio.
1. When the workpiece of the four-roller bending machine is still clamped in the upper and lower working rolls, the horizontal moving device shall not be started. When the horizontal movement is carried out, the upper roller lower busbar must be above the lower roller upper busbar;
2. When the plate bending machine removes the workpiece, it should prevent the oxide skin and dust from falling into the bearing of the beam;
3. When the lower roller and the support roller seat move horizontally, the left and right oil cylinders of the upper roller cannot be pressurized;
4, steel plate before rolling must be polished to remove burrs and sharp edges, clean up all welding residue, rust and dust.
Key words:
Previous Page
Next Page
Previous Page:
Next page:
Latest Developments
What are the areas of bending machine?
2024-10-22
How to detect the wear of rolling machine?
2024-10-22
