What is the structure of CNC four roller bending machine?
Release time:
2024-10-09
Author:
Source:
The two lower rollers of the bending machine are active rollers, which are transmitted by the main motor to the open gear pair supported by the lower roller through the three-stage transmission pair in the arc gear reducer with a ratio of 62.2, so that the lower roller obtains the design rolling speed and constitutes the main transmission system of the machine. Rolling machine is able to take the initiative to achieve overload maintenance, hydraulic overload maintenance system is composed of pneumatic pump, unloading valve, pressure relay, solenoid valve, pressure gauge and other components. The manufacturer of the plate bending machine shall be operated strictly according to the processing procedure and operation method of the plate bending machine. When the upper roller is lifted to the position, it is necessary to pay great attention to the safe operation of the equipment.
The two lower rollers of the bending machine are active rollers, which are transmitted by the main motor to the open gear pair supported by the lower roller through the three-stage transmission pair in the arc gear reducer with a ratio of 62.2, so that the lower roller obtains the design rolling speed and constitutes the main transmission system of the machine. Rolling machine is able to take the initiative to achieve overload maintenance, hydraulic overload maintenance system is composed of pneumatic pump, unloading valve, pressure relay, solenoid valve, pressure gauge and other components.Plate bending machine manufacturersStrictly according to the coil processing procedures and operating methods to operate, in the upper roller to lift to the position, to pay attention to the safe operation of the equipment.
CNC four-roller plate bending machineThe structure is four-roller type, with the upper roller as the main transmission, and the output gear of the reducer meshes with the upper gear to provide torque for the rolled plate. The lower roller makes vertical lifting movement, which is obtained by the hydraulic oil in the hydraulic cylinder acting on the piston, so as to clamp the plate for hydraulic transmission. Side rollers are arranged on both sides of the lower roller and move along the rack guide rail, which is driven by screw nut worm gear. The planning of the overload maintenance system of the bending machine is very accurate, it can maintain the equipment well and reduce the occurrence of equipment problems.
four roller plate bending machineThe equipment can be equipped with an internal lifting rack and an external bracket, etc., which can effectively control the weight deformation of the workpiece in the rolling process, assist the rolling, reduce labor, and provide product quality and work efficiency. proceedlarge plate bending machineWhen handling the coil, pay great attention to prevent the hand from being pressed by the steel plate and rolled together with the steel plate. For the machining system, adaptive control is an adaptive system that acts on randomly changing processing conditions. Its goal is to reduce the influence of external and internal uncertainties on the processing process in time, and to ensure that the processing process and results reach or are close to the set goals.
Key words:
Next Page
Previous Page:
Next page:
Latest Developments
What are the areas of bending machine?
2024-10-22
How to detect the wear of rolling machine?
2024-10-22
